Tascam DA-3000 High Resolution Stereo Master Recorder and AD/DA Converter

Description

This unit was refurbished by Tascam
Tascam DA-3000
Stereo Master Recorder - AD/DA Converter
High Resolution Stereo Master Recorder and AD/DA Converter
The DA-3000 is perfectly designed for stereo PCM/DSD recordings at high sampling frequencies suitable for archival masters. This magnificent unit is capable of recording analog and digital signals up to 192kHz PCM or 5.6MHz DSD. The unit records to both SDHC cards and UDMA supported CF cards
Features at a glance
Stereo recording to SDHC card or CF card
PCM recording format: BWF (44.1k/ 48k / 88.2k / 96k / 176.4k / 192k Hz, 16/24-bit)
DSD recording format: DSDIFF/DSF (2.8/5.6MHz)
SD card slot (supports 4 to 32GB SDHC cards)
CF card slot (supports UDMA)
WAV file playback
Cascade function enables simultaneous operation of multiple units
Recording 2 mono files from stereo input possible
Mark functions can be used set up to 99 points per file (mark information can be used in software that supports BWF format)
When recording, designation of the recording file folder possible
Synchronized recording using level, stop time and recording start delay time setting
Input level can be adjusted in 0.5dB step
Using automatic track incrementing function, new files can be created automatically while continuing to record when a condition (level, file size, digital input) set in advance occurs
Manual track incrementing function can be used whenever you like to create a new track while continuing to record
Automatic mark functions can be used to easily check problems (levels, word clock unlocking) detected during recording
File name format can be set to either a user-defined word or the date and time
Repeat playback function (all files or single file)
Folder playback function can be used to play all files in a folder
Playlist function allows files to be programmed in advance for playback
Divide and delete functions can be used to manage files that are already recorded
UNDO function can be used to cancel the previous operation
USB host port supports copying between USB flash drives and CF/SDHC cards
File names can be changed
Direct location possible when a USB keyboard is connected
Word clock master can be set to Internal, Word input or Digital inputs
Analog input and output reference levels can be set to –9 / –14 / –16 / –18 / –20dBFS
Digital input has a sampling rate converter (supports 32k to 216k Hz)
Audio files prepared on a computer can be played back (if in a format supported for playback by this unit)
Oscillator function (440Hz, 1kHz, 10kHz)
Input monitoring function allows input signals to be output without recording
Updating is possible
EI core transformer used in power supply section
Dual mono circuits eliminate interference between left and right channels
Fully-balanced circuits realize low noise
128 × 64 OEL display with a wide viewing angle
24-dot stereo LED level meters with adjustable brightness make checking levels easy
TCXO with 1ppm precision
Backup memory stores settings even when the power is off
Fanless design eliminates unwanted noise
Aluminum front panel harmonizes with other studio equipments design
Operation possible using included RC-10 wireless remote control
Standard 1/4" headphones jack provides 45mW/ch output
USB port for USB keyboard (supports USB1.1)
USB port for USB flash drive (supports USB2.0)
XLR digital input/output (supports AES3-2003 and IEC60958-4:AES/EBU formats)
RCA Coaxial digital input/output (supports IEC60958-3:S/P DIF format)
BNC digital input/output for DSD (supports SDIF-3 and DSD-raw formats)
RCA analog unbalanced input/output
XLR analog balanced input/output
EIA 1U rackmount size
RoHS compliant